Palladium 事务级实战 · 04 从本地仿真接入 Palladium

#!/usr/bin/env bash
# WXE 24.05 reference integration, NOT tested with Cadence tools.
# Start after the authorized site environment is initialized.
# Usage: bash scripts/site_reference.sh sim|tba NEW_BUILD_DIR
set -euo pipefail
mode=${1:?sim or tba}; out=${2:?new build directory}
case "$mode" in sim|tba);; *) echo 'mode must be sim or tba' >&2; exit 2;; esac
root=$(cd "$(dirname "$0")/.." && pwd)
if [ -e "$out" ]; then echo 'BUILD_EXISTS: use a fresh directory' >&2; exit 2; fi
mkdir -p "$out"
cd "$out"
if [ "$mode" = sim ]; then
 xrun -64 -sv -top hw_top -top tb_host -c \
  +define+PALLADIUM_HOST \
  "$root/rtl/course_fifo.sv" "$root/rtl/batch_engine.sv" \
  "$root/rtl/fifo_link.sv" "$root/rtl/clk_gen.sv" \
  "$root/rtl/hw_top.sv" "$root/tb/tb_host.sv" 2>&1 | tee compile.log
 xrun -64 -R +N=64 +BATCH=16 2>&1 | tee run.log
else
 # Separate hardware compile from host compile; keep generated library mapping.
 vlan -64 -sv -define IXCOM_UXE \
  "$root/rtl/course_fifo.sv" "$root/rtl/batch_engine.sv" \
  "$root/rtl/fifo_link.sv" "$root/rtl/clk_gen.sv" \
  "$root/rtl/hw_top.sv" 2>&1 | tee vlan.log
 ixcom -64 -top hw_top +dut+hw_top -nccompile +iscDelay+clk_gen -ua 2>&1 | tee ixcom.log
 xmvlog -64 -sv -define PALLADIUM_HOST -cdslib xc_work/cds.lib -hdlvar xc_work/hdl.var \
  "$root/tb/tb_host.sv" 2>&1 | tee host-compile.log
 xmelab -64 -f xc_work/xmelab.f tb_host -access rwc 2>&1 | tee elaborate.log
 xrun -64 hw_top -f xc_work/xrun.f +N=64 +BATCH=16 +xcprof \
  -input "$root/scripts/run_tba.tcl" 2>&1 | tee run.log
fi

# Reference only: verify site/tool compatibility and actual swap-in logs.
# Clock/reset live under hw_top; do not reuse the SA script's software run 40ns.
xc on -tbrun
run